Hi I have a Pioneer VSX-C100 multi channel reciever and a Panasonic TV. the reciever comes with a multi-functional remote and i want to get the remote working with the tv. any idea's how? a pictue of the remote can be found on the Pioneer website along with the reciever.

Hi Tommy,

I think it is possible to get the remote working with your panasonic tv via a specific three digit code you can type in (the code for panasonic should be listed in the remote's manual). Below are some instructions i found on how to do this:

To change the code for TV control:
1. Press TV Control Power On key whilst pressing the ENTER key on the remote, the LED should light
2. Enter the three digit code upon which the LED light goes off.

Hope it works!

Al

Thanks for that Al but i no longer have the manuals and therefore i cannot obtain this code. do you know if there is another way of getting these codes?
Tommy

Probably the easiest way is to contact Pioneer directly - i'll drop them an email...

Al

Ok, the following codes are for Panasonic tvs - give them a try. Not sure which one's the right one...

608, 622, 631, 642

Cheers,

Al

Many thanks Al it now works perfectly.
Thanks again Tommy

Do you have any idea of how to reset the codes back to the factory setting later on if i need to?

Tommy

Glad that worked! Here's how to reset the remote to its factory settings:

While pressing the ENTER button press and hold the 0 button for three seconds. The LED on the remote control blinks three times indicating all the preset codes have been cleared.

Al

Thanks Al it is working just fine now, I can use my TV, DVD Player, VHS Player and Amplifier with one remote!!!!!
Thanks 4 Everything,
Tommy

my name is jaso i have a pioneer cu-vsx045 audio video programmable remote control unit i was just wondering if you could tell me how to program anything on it i do not know how to get the romote into program mode?