|
| Micro Ti and A'Diva Ti
|
This autumn will see the the launch of three all-new products from renowned loudspeaker manufacturer Anthony Gallo; the Micro Ti, the A'Diva Ti and the Reference 3 SA amplifier.
The new Micro Ti and A'Diva Ti take the looks of the original Micro and A'Diva and pair them with a 'high-end' 1in Titanium driver featuring a Titanium cone, a high-power Neodymium magnet and a large 1in voice coil. They have been specifically designed for music and movie lovers that are attracted by the spherical appearance, small size and relative affordability of the originals, but want the extra performance that only the new Titanium driver can offer.
Both models feature a new metal grill that, in addition to being acoustically transparent, offers a glimpse of the new driver, making the higher performance Ti models immediately identifiable. Micro Ti and A'Diva Ti will initially be available in a choice of three finishes: Matte White, Matte Black and Brushed Stainless Steel. Further colours are expected later.
The 'Ti' models will be available from the autumn are expected to sell for a retail price of £200 (£225 for Stainless Steel finish) per unit for the Micro Ti and £300 (£325 for Stainless Steel finish) per unit for the A'Diva Ti.
|
| Reference 3 SA
|
The new Reference 3 SA is a 2x240-watt amplifier, specifically designed to work in parallel with Anthony Gallo's flagship Reference 3 loudspeaker to offer even greater bass extension. Featuring an active crossover and bass EQ circuitry, the SA amplifier 'actively' powers a second voice coil on the Reference 3's bass driver, via a second set of input terminals on the speaker. Anthony Gallo claims the effect of utilising this second voice coil is akin to adding two perfectly integrated subwoofers into the room, taking linear bass response down to 22Hz.
With the ability to bridge the channels in the amplifier, output is boosted to 600 watts, which, along with the added features of bass EQ control, dual mono attenuators, phase control and adjustable low pass filter control, is claimed to make the Reference 3 SA an ideal method of controlling and powering passive subwoofers.
The Reference 3 SA will be available for £900 with a choice of either stainless steel or black faceplates.
More information on Anthony Gallo's products can be found at www.anthonygallo.co.uk
|
Specifications: |
Micro Ti
Frequency Response On Wall: 100Hz to 22Khz, On Stand: 120Hz to 22Khz
Sensitivity: 89dB
Nominal Impedance: 8 ohms
Power Handling Crossover: >120 watts
Power Handling Full Range: -
Height on Stand: 36"
Drivers: 3” Pure Titanium
Crossover: None
Dimensions: 4" Sphere
Weight: 1.5lbs
A'Diva Ti
Frequency Response On Wall: 76Hz to 22Khz On Stand: 88Hz to 22Khz
Sensitivity: 88dB
Nominal Impedance: 8 ohms
Power Handling Crossover: 60 watts
Power Handling Full Range > 120 watts
Height on Stand: 37" Drivers: 3” Pure Titanium
Crossover: None
Dimensions: 5" Sphere
Weight: 2lbs
Reference 3 SA
Frequency Response: Low-pass mode 20Hz - 180Hz, Full range 10Hz - 28kHz
Power: Stereo 240 watts, Mono 600 watts
Input sensitivity: 130mV
Phase: dual mono, continuously variable
Low pass: 40 - 180Hz, continuously variable
Gain: dual mono, continuously variable
Power on/off: always on, signal sensing on, remote trigger
Dimensions: 17/19" W (rack ears removable) x 4" H x 14" D
Weight: 25lbs
Connections: RCA inputs, 5-way binding posts
Finishes: Black or silver
Warranty: 2 Years Parts and Labour
|
|
